Turnout switch 2843.00.000

Double cross switch on reinforced concrete beams type P65, grade 1/9, project PTKB TsP 2843.00.000

Separate fastening, spring terminals type OP105 or type PC, pads with high flanges. Track adjustment is possible. The switch uses rotary points with insert-on-plate root fastening and adjustable rods. The frame rails are attached to pads with pads (welded with pads) and pressed flanges using U-shaped spring terminals and clamps. The crosspiece is a sharp one of a welded design - a rail end is welded to a core made of high-manganese steel, a dull one - solid cast from high-manganese steel on pads. The counter-rail is made from an angle, is not connected to the track rail, and is fixed on stops welded to the pads. The rail is fastened using elastic U-shaped rod clamps.

Type

P65

Peculiarity

double cross

Brand

1/9

Type of bars

reinforced concrete

Products

main tracks

Straight frame rail with curved point 4
Curved frame rail with straight blade 4
Sharp cross t P65 m 1/9 2
Blunt cross t P65 m 1/9 2
Cross rail with counter rail left 2
Cross rail with counter rail right 2
Rail type P65, length 6419 mm 4
Lining 1KB65 GOST 16277-93** 120
Overlay 1Р65 GOST 8193-73 32
Set of rubber gaskets 1
Boxes with parts for turnouts, rail fastenings** and fittings*
Bundle of headset parts 1
* Set for double cross switch on reinforced concrete type P65 grade 1/9 - project 17532-00-00
** Pads 1KB65 GOST 16277-93, rail fastening parts are supplied upon request.
Insulating joint of rails T.P65 with polymer linings TsP478-01, set 4
Set of reinforced concrete beams according to the VNIIZhT project 2002-08, set 1
Electric arrow drive, pcs. 4