Turnout switch 2844.00.000

Switch switch on 1067 mm gauge reinforced concrete beams, type P65, grade 1/11, project PTKB TsP 2844.00.000

Designed to transfer rolling stock from one track to another. Separate fastening, PC type terminals, pads with high flanges. The switch uses rotary points with insert-on-plate fastening of the root, adjustable rods. Frame rails are attached to pads with pads (welded with pads) and pressed flanges using U-shaped spring terminals and PC-type terminals. The crosspiece is a prefabricated one with a core type of general casting with the most worn part of the guard rails made of high-manganese steel. The counter-rail is made from an angle, is not connected to the track rail, and is fixed on stops welded to the pads.

The rail is fastened using elastic U-shaped rod clamps.

Type

P65

Peculiarity

track 1067 mm

Brand

1/11

Type of bars

reinforced concrete

Products

main tracks

Straight frame rail with curved point 1
Curved frame rail with straight blade 1
Rails length, mm 9349 1
7822 1
9314 1
7884 1
7000 2
Crosspiece type P65 grade 1/11 1
Cross rail with counter rail 2
Set of linings 1
Set of rubber gaskets 1
Lining 1KB65 GOST 16277-93** 142
Overlay 1 P65 GOST 8193-73 20
Boxes with parts for turnouts, rail fastenings** and fittings*
Assembly with headset parts
*17531-00-00, set for switch t. P65 m. 1/9, 1/11 gauge 1067 mm on reinforced concrete
** Pads 1KB65 GOST 16277-93, rail fastening parts are supplied upon request.
Set of reinforced concrete beams according to the VNIIZhT project 2001-06, coml 1
Electric arrow drive, pcs. 1
Insulating joint t. P65 with polymer linings P478-01, set 2