Separate fastening, spring terminals type OP105 or type PC, pads with high flanges.
Track adjustment is possible. The switch uses rotary points with insert-on-plate root fastening and adjustable rods. The frame rails are attached to pads with pads (welded with pads) and pressed flanges using U-shaped spring terminals and clamps. The sharp crosspiece is of a welded design - the rail end is welded to a core made of high-manganese steel, while the blunt crosspiece is solidly cast from high-manganese steel on pads. The counter rail is made from an angle, is not connected to the track rail, and is mounted on stops welded to the pads. The rail is fastened using elastic U-shaped rod clamps.
Turnout switch 2869.00.000
| Type |
P65 |
|---|---|
| Peculiarity |
with track adjustment , double cross |
| Brand |
1/9 |
| Kind of wit |
welded |
| Type of bars |
wooden |
| Products |
main tracks |
| Straight frame rail with curved point | 4 things. |
| Curved frame rail with straight blade | 4 things. |
| The cross is sharp | 2 pcs. |
| The cross is blunt | 2 pcs. |
| Cross rail with counter rail | 4 things. |
| Boxes with fittings* and turnout parts | 1 set |
| Overlay 1Р65 GOST 8193-73 | 32 pcs. |
| Rails type P65, length 6419 mm | 4 things. |
| Linings | 1 set |
| Boxes with parts for fittings*, switches and rail fastenings | 1 set |
| ** Linings 1SK65 GOST 16277-93 | 120 pcs. |
- SP6M electric drive set for double cross switch type P65, grade 1/9, project GTSS 17561-00-000
** Pads 1KB65 GOST 16277-93 and rail fastening parts for them are supplied upon request.
| Insulating joint for rails type R65 TsP 478-01 | 4 things. |
| Electric drive SP6M | 2 pcs. |
| Track screws GOST 809-71 | 1 set |